Laser Cutting Machine Reviews & Testimonials

Package came slightly damaged but the laser metal cutter machine is in good condition. STYLECNC support did a outstanding job of taking care of any of the issues I encountered. I've had the laser for three weeks and it works great. I'm using it to cut stainless steel kitchen utensils, cookware and bakeware, and all the metal parts involved in the fabrication, resulting in smoother and cleaner cuts than plasma cutting. Not an inexpensive option when you factor the cost of the unit, consumables, power to run it, the air compressor, industrial water chiller, and the working gases needed, but time is money, and this fiber laser is the right cutting tool if you're working on much more cuts. We will see how long it holds out for. All in all, I would definitely do business with STYLECNC in the future.

This fiber laser cutter is most likely the greatest thing I have ever purchased it fits perfectly in my livingroom (Wife doesn't like it there but I say its my house). I've been using it for about a month and cannot stop using it. I've started running out of metal to use basically everything in my house is made of metal my phone case is even metal. Metal is my life its my muse I cannot stop lasering my wife has threatend me of getting divorce but I don't care im going to make a metal wife, a wife that doesn't care about you shaving down there. I hate my wife and I'm going to make a better one. After that she will probably take the kids but that doesn't bother me I have a CNC laser metal cutting machine I can make new children if I want to.

In the past years, I have only used plasma cutters. I wanted something fast with high precision. This fiber laser cutting machine fit the bill. I wired it up for 220v use. It performed as described and cut through 1/8 steel plate with no trouble. Super handy metal cutting tool for beginners, but the only regret is that the initial investment cost is higher for business starters.

Easy to assemble, everything plugged in as it should. Control panel is user friendly. Software came with the all-in-one fiber laser metal cutter is easy to use, enabling automation and modular cut in metal fabrication. Had some parameter setting issues and they were prompt to respond online and sort it all out. Used it cut through 20mm mild steel plate to make metal parts, as well as custom handrails and guardrails from 6mm 304 stainless steel round tubing. 4000 watt high laser power kept cutting at a fast speed for smooth and clear cuts with fast speed. As others have reviewed and I can now also attest that STYLECNC is focused on product quality and customer support. This is why this brand has earned my five star rating. Would recommend them to all without reservation.

Well packaged with perfect condition. Easy to make it work. I cut a variety of thickness stainless steel sheet and pipe with no problems so far. Resulted in clean and smooth cut outs. Worked great as expected. I am very impressed with the performance for the money you can't beat it. I hope this all-in-one laser metal cutter holds up well.

The intent of this small laser cutter purchase for me is as a hobbyist. Exactly what I expected. I took 1 hour to build it, and achieved a nice, tight assembly in the end with clear instructions. It has been cutting balsa wood sheets every day since we got it assembled. So far every cut is clear and smooth.  A good value for the money.

Great packaging. Everything is top of the line and easy to put it together. No issues with the assemble at all. This automatic laser cutter is a great addition to my sign business. A bit of a learning curve at first but it will be easy to use once you figure out what to set for depth, type, and material. I have made lots of clean cuts with plywood and clear acrylic. Very fast and precise. So far so good. Best bang for a buck. Already starting to make money with custom personalized signs.

My old CO2 laser is limited to cut metal and so I purchased this hybrid laser cutter as an upgrade version. Instructions are easy to follow on how to put it together and set cutting parameters in the controller software. It has worked great for both sheet metal and wood, I have used it to cut a lot of stainless steel and plywood enough to pay for itself. A lot of bang for the money.

Surprised at the quality of this compact laser jewelry cutter when it arrived. Put it together in 30 minutes. Small size and easy to move. I bought this unit to make pendant necklaces of silver and gold. It is easy to use with an automatic cutting software and there are no issues so far. I have tried this cutting tool to cut sterling silver sheet and it resulted in clear and smooth pendants without sanding in seconds. I will try to cut more types of metals in the next week.

Have been needing a laser bought for ability to easily cut both metal and acrylic. The ST-FC1325LC is the right one for me. It came well packaged. The provided instructions, parts and accessories will have you up and running in 1hr. I have been using this automatic cutter for a month and I love it. It cuts through steel and acrylic sheet like butter. Its outstanding ability surprised me.

I use this metal laser cutter to cut stainless steel sheet of 1/4in x 4ft x 8ft to make signs for my advertising business. So far so good. It is easy enough to work with, and cuts well, like a hot knife through butter. Just hope to continue to use for a long time in future.
The software came with the machine is easy to use for my business. With remote assistance from STYLECNC, the software installation and setup can be completed in 45 minutes. Excellent customer service and technical support.
Also, 1064nm fiber laser beam is dangerous to cause eye injury and hand burns, wear leather gloves and safety glasses when using this machine. Overall, take care.
I try to buy well made laser machines that are worth my money, this unit seems to qualify. No real complaints about this cutting tool. Great value. Would highly recommend it.

No issues putting it together. Starts easily. Cuts extremely well. My first task with this machine was to cut the 3/8 steel plate, and it cut much better than the industrial units I am used to. I should mention that this fiber laser machine does NOT require you to touch the work to start the cutting with CNC controller which makes it VERY easy to use. A great laser cutter for sheet metal at a great price.

STJ1390 is a great piece of laser cutter for beginners. I bought it to start a small advertising shop. Got it in 12 days, and everything was pretty good. Easy to put together in 1 hour. The software was easy to use, but the installation and setting took me some time to learn. Many thanks to the customer service team, which was awesome in troubleshooting and I would give them more credit. I used it to cut signs with plywood and acrylic, and got fine results with clean and smooth edges. I think this laser has a lot of potential to create many things, and I will try it on more materials. Overall, it is worth your money.

Nice packaging and fast delivery, included everything you need to cut and engrave right out of the box. It's more of an industrial style than a hobby reliant model. I just need to cut plywood and thin metal plate, and I was initially skeptical about its capabilities. However, it is more powerful than you can imagine, so I'm surprised as cheap as it's priced, which is more affordable than buying an expensive fiber laser. All in all I'll give it a 5 star and highly recommend it.

Bought this laser cutter to upgrade my metal crafting in commercial use. It is fast and easy to use with smooth & clean cut, and save you much more cost and time compared to waterjet and plasma cutters. In additional, it is an auomatic power tool with CNC contoller compared to handheld tin snips and shears. This machine has been cutting exactly as I expected. It is great to cut the edge of sheet metals. I have cut over 100 Pcs of 4x8 stainless steel plates 304 so far with no issues. Expect it to perform better in the future.

The IPG laser metal cutter is easy to setup and use for a novice user, it cuts great on 1/2 inch stainless steel sheet and 9/16 aluminum sheet at a higher speed up to 160 inches per minute, as well as works on 2 inch mild steel plate at a lower speed of 20 inches per minute. It cuts through with smooth edges, much better than the plasma cuts. In additional, it's an automatic precision metal cutting tool with CNC controller, almost no need of manual intervention.

I was wary of purchasing a Chinese-made laser cutter off the internet, but the reviews convinced me to give it a try. Got this unit in 28 days. No trouble in assembly and parameter setting. I've tried it to cut 304 and 316 stainless steel plates and pipes for kitchenware and gotten the cleanest cuts. It's a powerful all-in-one machine for both sheet metals and tubes. No regrets with the buying of this great cutter.

STYLECNC is well known for making quality laser cutters. Considering it is a name brand, I bought ST-FC60M for my workshop last month. I have never used an automatic tube cutter like this one. However, it was easy to setup and operate. I used it to cut 5/8 inch OD straight copper and aluminum tubing and 1/4 inch OD D-shaped stainless steel pipe. All the edge cuts flared perfectly without cleanup. Did great jobs with ease. I'm impressed with how well it cuts with higher speed and precision.

I bought this for my workshop to cut outer and inner car panels made of aluminum and steel with high precision cut requirements. The automatic fiber laser blanking system works great for the money. I would recommend purchasing this to anyone looking for the best budget coil fed laser cutting system. Be safe in cutting, it is a high power laser machine, follow the safety precautions.

The laser machine is packed well, after the training was completed, I did a few practice cuts on some 1/2in x 18in steel pipes. And the tube cutter worked automatically and easy to make perfect cuts with no OD burrs. Well worth the purchase. Bonus: Made in China.

The whole production stay in safe with this enclosed cover of the fiber laser metal cutting machine, at least my boss thinks so. And the exchange table helped cutting 20mm MS a lot. An frame crane is all you need.

This is a fantastic pipe cutter and cuts very smoothly. It has proven much better than my previous cheaper plasma tube cutter. It is very easy to use and resulting in a accurate and clean cut. Glad to have this added to my business.

Easy to assemble and use. High performance and low operating cost. This laser metal cutter can cut carbon steel with fast speed and high precision, it adopts high quality fiber laser generator with up to more than 100,000 hours life-cycle.

BEST laser cutter for metal we have ever purchased. For 10 hours daily working, it still keeps high precision and high cutting speed. I really love it. HIGHLY recommend STYLECNC for any future purchases. In addition, the ST-FC12025GH has a couple of upgrade options with larger tables, higher laser powers, and more laser brands except for IPG. Satisfied to have a decent automatic cutting tool and a company behind it to support it.

I bought this laser blanking line to upgrade my business for making air conditioning systems, heater housings, heat exchangers, protective covers and a variety of parts & accessories with aluminum, mild steel, stainless steel, galvanized steel and pre-painted steel. Got the setup done in 1 hour. Easy to cut with a short learning curve. Well worth the investment.

This is the PERFECT hybrid laser cutter machine and I would like to recommend to my friends. Also thanks to the staff who has helped me with the details and gave me the very helpful intros.

Just got my new jewelry store up, and added this machine to cut metal jewelries of copper and silver. Tried it for 1 week, it has been cutting smoothly with precision. I'm pleased with this small laser cutter for the price I paid. Definitely worth the money.

This laser was as plug-n-play as could be expected. It has been working excellently better than it should be. Cutting thin stainless steel sheet with decent accuracy. Engraving photos on wood like a work of art.

The STJ1390 was stable and went together within 50 minutes. I like this laser cutter. It works the way I expected it to. I am currently cutting and engraving acrylic and paper. Looking forward to etching glass and wood.

This is the best laser cutter I've ever received anything ordered online. I'm about to use but so far all looks good. Thank you, STYLECNC. Excellent work. I would buy again.

Mükemmel, lazer kesiciden çok memnunum. Fiber lazer kafasını metal kesimler için test ettim - mükemmel çalıştı. CO2 lazer kafasını denedim - ahşabı iyi kesiyor. Çift amaçlı harika bir hepsi bir arada makine.

We started with a $1200 laser cutter and outgrew it fast. We moved up to this one and have found it to have more capability. Now I believe STYLECNC's seller told me "you get what you pay". LOL.

Já recebi e verifiquei, está tudo perfeito. Cortei aço inoxidável de 1 mm para teste, a qualidade e a velocidade me deixam feliz, certamente feliz com este cortador a laser.

Description matches than expected and the received laser cutter. The packing is fine, EVERYTHING works well.

Got the laser wood cutter early this week. All going well so far. I'll come back to update my review after cutting more.

Great laser. Works well for leather fabric, does what it is supposed to do. I get genuine leathers cut so much faster and easier. Be careful though, the laser will cause serious eye injuries if you approach it without safety glasses and goggles.

The parts are easy to assemble, the drivers and laser software based on Windows are easy to install. Easy to operate for beginners, and accurate enough to cut sublimation apparel. Works great for fabric cuts.

I bought this laser 3 months back and tried it a little, but today was the first time I actually used it for a cut. It worked out great. I had 1/8 stainless steel plate to cut and it did great as I was expecting, but way faster then and my other options.

Set up was easy right out of the box. Very satisfied with the performance of this laser metal cutter. So far it has done everything I have asked it to do. The cutting of 1/8, 3/16, 1/4 was so easy. As far as the laser software and the CAD software is concerned, it would be good if they were together in the same system and if possible that cutting shapes and contours could be generated from basic geometric figures.

Assembly was easy to do with the instructions. Software was easy to use and got the first cut done without any snags. In my opinion this laser cutter is well worth the extra investment. All will be recommended to you familiar.

Bought this as an alternative to the ordinary CO2 laser. Building was pretty easy. Worked great for both metal and acrylic, and was not too expensive. Overall, decent laser for the purpose and it meets my needs.

I have had a good time learning how to use the RD6332M controller with the laser and have been satisfied with the cuts of wood, ss and cs. Overall, this laser has given me something cool to pickup.

I had been looking at other laser cutting machines but I found that the STJ1390M was easy to use and much faster lasering. Super awesome for my advertising shop.